Thesis on induction motor drives

The space vector modulation technique differs from the hysteresis modulation in that there are not separate comparators used for each of the three phases.

Another major advantage of the Induction Motor over other motors is the ease with which its speed can be controlled. The hysteresis modulation is a feedback current cont rol method where the motor current tracks the reference current within a hysteresis band.

Click the button below to return to the English version of the page. Professional essay authors Our authors might help have the essay normal again, check out our services for more information on how you might help.

A SLIDING MODE CONTROLLER FOR INDUCTION MOTOR DRIVES

In comparison, if stator flux amplitude should be reduced, a gift vector, phase shifted by an position under 90o will most likely be used.

While using outputs of people controllers along with the immediate position of stator flux vector, a powerful current space vector is chosen. Thesis submitted for examination for the degree of Master of Science in. The control circuit used was also an extension of the one used previously in the Single-Phase Inverter model.

Thus the two pairs are switched ON in alternating cycles of operation. Saeed Haghnazari, Fast failure detection in modular multilevel converter power switches for fault tolerant operation, PhD Thesis, Sharif University of technology, to be completed Tesla used a ferromagnetic cylinder with a short-circuited winding.

The 3-phase PWM Inverter modeled previously in the last chapter was used. Modulation Techniques The VSI inverters used in the AC drive models of the library are based on two types of modulation, hysteresis modulation and space vector pulse width modulation PWM.

Dunnigan, and Barry W. Availability of design optimization tools. Past work on loss minimization has focused on specific drive components such as the machine stator and rotor windings, inverter and dc-link. A logical 1 means that the upper switch is ON and logical 0 means that the lower switch is ON.

InGeneral Electric and Westinghouse signed a cross-licensing agreement for the Squirrel- Cage design of the Induction Motor, and byit was all set to become the industrial staple. It was observed that using a Closed-Loop scheme with a Proportional Controller gave a very superior way of controlling the speed of an Induction motor while maintaining a constant maximum torque.

This thesis focusses on the development of a high performance sensorless induction motor drive. Better analytical models for design and research purposes. The resulting Torque vs Speed graph was plotted. Since communication via pulses has been introduced, the amplitude, frequency and width of pulses started being modulated by the message signal.at the moment i am trying to make in simulink an induction motor with vector control.

I have a model of an induction motor and the model of the vector control. My problem is the tuning of the PI. INDUCTION MOTOR DRIVE A THESIS SUBMITTED TO THE GRADUATE SCHOOL OF NATURAL AND APPLIED SCIENCES OF THE MIDDLE EAST TECHNICAL UNIVERSITY BY AKIN ACAR However, an intelligent induction motor drive should be capable of identifying motor parameters itself.

Simulate an AC Motor Drive. To use the AC drive models of the Electric Drives library, you first specify the types of motors, converters, and controllers used in the six AC drive models of the library designated AC1 to AC6.

The AC1, AC2, AC3, and AC4 models are based on the three-phase induction motor. This motor has a three-phase winding at. EFFICIENCY OPTIMIZATION OF A DIRECT TORQUE CONTROL (DTC) / I, SIM SY YI, agree to allow this Doctoral Thesis to be kept at the Library under the following terms: 1.

Select a Web Site

This Doctoral Thesis is the property of the Universiti Tun Hussein Onn Malaysia. Efficiency Optimization of Induction Motor Model of induction motor changes to power system disturbances A novel approach in the design of optimal tuning frequency of a single tuned harmonic filter for an alternator with rectifier loads Evaluation of filter design and harmonic analysis using pscad/ emtdc.

Design and Implementation of Induction Motor Control This describes the design of a Three Phase Power Converter (AC/DC/AC) as a The system implemented converts a three phase input voltage of Vrms at a power rating.

Download
Thesis on induction motor drives
Rated 0/5 based on 95 review